October 2006 Equipment Round-Up - Conveyors

Conveyors help bring speed and efficiency to food processing plants and operations.

Share Print Related RSS
Page 2 of 2 1 | 2 Next » View on one page

Piab USA; Hingham, Mass.
800-321-7422; www.piab.com

 


 

Dust-free unloading

The new Half Frame Bulk Bag Unloader offers total dust containment at low cost by eliminating upper frame components to lift and/or position the bag, instead relying on the user's forklift or plant hoist to suspend the bag above the unit. The bag-to-hopper interface allows dust-tight connections and unrestricted flow between bag spout and hopper and the optional Flexible Screw Conveyor is capable of elevating bulk materials including products that pack, cake, plug, seize, smear or fluidize and blends that separate.

Flexicon Corp.; Bethlehem, Pa.
888-353-9426; www.flexicon.com

 


 

Keep a low profile

Ideal for many food processing applications, the 250 Series center drive line of conveyors combines a unique center drive and very low profile (1.89 in.), which allows use in very tight quarters where conventional conveyors will not fit. The snap-in sealed tail assembly allows belts to be changed in less than 5 mins. and the bearings can be lubricated while running. Corrosion-resistant and magnetic belting are available as well as more than 50 styles of application-specific belting. A wide variety of accessories make the line adaptable to virtually any application.

QC Industries; Cincinnati
513-753-6000; www.qcindustries.com

 


 

Flexible and versatile

The Multi-Flex conveyor system brings the greatest flexibility in assembly/changeover ease to low-profile conveyors. The conveyor system has three angle selections (30, 45, and 60 degrees) and eight configurations for easy changeover and product transfer. It combines the industry's quickest endless belt removal and tension/tracking system with rapid, accurate belt calibration. Frame sections permit random repositioning, and drive and tail pulley location can be reversed to meet changing needs.

Conveyor Technologies Ltd.; Milford, Ohio
513-248-0663; www.conveyortechltd.com

 


 

Gravity loaded

The DPG-B Series gravity loaded bottom-discharge dense phase conveyors are ideal for moving powdered, granular or pelletized friable and abrasive materials. They are rated up to 100+ TPH and provide high material-to-air ratios and extremely low line velocities. The result is smaller line sizes, lower air consumption, reduced dust collection and lower capital investment and operating costs. Abrasive wear and particle degradation are also minimized. Programmable controls offer reduced supervision for automated operation.

Cyclonaire Corp.; York, Neb.
800-445-0730; www.cyclonaire.com

 


 

Pop-up conveyor

The new Pop-Up Transfer Conveyor lifts items vertically and then conveys them 90 degrees to an adjoining conveyor. The system utilizes a mechanical linkage to guide lifting. Strands are driven by a motorized roller, eliminating chain drives and resulting in quiet operation. Users can choose from Urethane V-belt, Urethane O-ring or chain strands, and can specify strand number and stroke height to suit particular application needs. It is suitable for the food and beverage industry where non-contact between products is crucial.

TKF Inc.; Cincinnati
513-241-5910; www.tkf.com

Page 2 of 2 1 | 2 Next » View on one page
Share Print Reprints Permissions

What are your comments?

Join the discussion today. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments