MRO Q&A: Proper Cleaning of Closed Cell Spray Foam Walls

Jan. 10, 2012
MRO Q&A is a Food Processing series addressing maintenance, repair and operational issues in food plants.

Q. Can closed cell spray foam walls in a food processing facility be adequately cleaned?

A. Absolutely, a closed cell foam sprayed wall can be cleaned adequately -- if you are willing to invest the additional labor to insure the microbial load that may remain on the wall is below the FDA established upper limits or if you are willing to use a cleaning solution that has a high oxidation capacity (e.g. ozonated water, chlorinated rinse). As we all know "The devil is in the details."

To pose a question to our panel of plant operations experts, check out our Plant Maintenance Resource Center

The closed cell approach is by far the most cost effective short-term solution, and is the best solution for mitigating an existing concern at the least cost. However, keep in mind that all materials have a shelf life and are also susceptible to the rigors of your plant's operation. The security that closed cell applications offer could, in the short term, easily be compromised by fork-lift drivers or workers that may scrape the side of the wall and compromise the protection this type of surface originally offered. If this is not a concern, closed cell could be the most economical solution.

If considering new construction for the wall is an option, I would suggest using an IMP (insulated metal panel), which has a greater ease of cleaning and is much more compatible with a myriad of cleaning agents. Typically, they are installed with a protective 2-3 foot base to prevent damage and are USDA and FDA approved. If expansion calls for it, the panels can be removed and reused. This really works well for growing companies that need to make every dollar count.

Sponsored Recommendations

Revolutionizing Healthcare: The Impact of Digitalization in Biopharma Innovation

Biopharma enables an entirely new level of innovation that’s simply not possible in conventional drug development. It’s an approach that can fundamentally change the way healthcare...

Navigating the Automotive Industry's Electric Future

The automotive industry is at a turning point. Bloomberg estimates that by 2040, 54% of new vehicle sales will be electric. And by 2030, we’re looking at 100% of passenger vehicles...

Unified Process Control Brings Operational Clarity

Inland Empire Utilities Agency replaces its SCADA enterprise system with the PlantPAx Distributed Control System and reduces complexity for operators

PlantPAx DCS Improves Operational Reliability

KC Water calls on R.E. Pedrotti to replace obsolete wastewater SCADA solution with a unified Modern Distributed Control System (DCS).