1660319912552 Campbellsoupnapoleonohio

Want Continuous Improvement? Lean In to your Organization

April 7, 2014
Dieters aren’t the only ones cutting down on fat. Most food companies are encouraging their staffs to learn the ways of lean manufacturing.

Alan Lambert (left) leads a kaizen event focusing on ergonomic issues in the production environment. Food & beverage companies are finding that training workers in the techniques of waste reduction can produce significant improvements. Photo: Risk Management Group

Like sharks, organizations must keep moving forward or they sink like stones. The best way to keep moving is to pore over existing practices and find ways to execute them better.

That, in a nutshell, explains the popularity of lean manufacturing and other formalized approaches to continuous improvement. Formalized programs to re-examine existing practices have become mainstream in food and beverage organizations.

In Food Processing’s 2014 Manufacturing Trends Survey, a slight majority of industry professionals indicated their companies had instituted formal improvement programs. Lean initiatives were being pursued at more than a third (35 percent), followed by 5S (28 percent), TQM (24 percent) and Six Sigma (21 percent). Kaizen events, value stream mapping, Poka-Yoke and OEE metrics were among the additional tools cited. As the ratios suggest, use of multiple methodologies are common.

Lean implies a lack of fat, and the elimination of fat, or waste, underpins most continuous improvement efforts. But waste reduction isn’t the only goal pursued. Injury reductions, supply chain efficiencies and other objectives drive many of today’s initiatives. The common thread is the formal structure these methods provide. Consider them an interactive version of the company suggestion box.

Structured programs require formal training, and companies often run into difficulties when trying to mesh the various continuous improvement methods and in sustaining the gains they first achieve.

In a presentation at the American Society of Baking’s annual conference in March in Chicago, Derek Contreras, production resource leader at Bimbo Bakeries USA, Horsham, Pa., cautioned against reliance on trainers from outside the organization. Consultants can provide useful tips, but improvement programs often falter after they leave. “If you want something to be sustainable, the associates must be engaged,” Contreras advised.

Contreras described the company’s use of 5S, kaizen events, value stream mapping and other methodologies to address training needs, raw material waste, rework and downtime. In attacking changeover time, the bakery applied 5S, Poka-Yoke and value stream mapping, aiming to cut in half each changeover. Ten changeovers a day at the divider are typical, he said, and shaving 15 minutes from each changeover would save $200,000 a year at each of the firm’s 34 bakeries.

Sponsorship by senior management and leadership by plant managers are necessary to implement improvement efforts that align with organizational goals, but they must be “driven from the bottom up,” Contreras said.

All of the systems cited by Contreras are useful, but gains will prove unsustainable without a fundamental change in an organization’s culture, insists Andy Carlino, a founder of the Lean Learning Center in Troy, Mich. From his perspective, lean is the overarching structure that turns improvement programs into collaborative efforts.

Cans still constitute the majority of condensed-soup containers produced at Campbell Soup’s Napoleon, Ohio, plant, but several other packaging options exist, requiring a focus on continuous improvement to add flexibility to high throughput. Photo: Campbell Soup Co.

“Six Sigma is an extremely powerful tool for working on very complex issues,” he says, “but it’s only useful for big problems, not everyday continuous improvement operations. “5S and kaizen also are tools of lean, but if you have a hammer, every problem is a nail. You have to understand the purpose of a change before you select the tool.”

For example, 5S -- shorthand for sort, set in order, shine, standardize and sustain -- is often viewed as simply good housekeeping, but Carlino characterizes it as a standardization tool for identifying abnormalities. The floor of a NASCAR shop is kept spotless not because the crew has a cleaning fetish but because it helps highlight any fluid leaks. “Visual management could to the same thing,” he notes.

Getting lean religion

Food company personnel were few and far between when Carlino’s firm conducted lean training sessions in the mid-2000s. By the beginning of the century’s second decade, half the trainees hailed from food and beverage. A contingent from Glanbia was among Carlino’s early disciples, but after some early victories, the Idaho firm’s lean initiative faltered and recidivism surfaced.

Not until a new executive manager joined the Twin Falls, Idaho-based dairy processor in 2010 did the effort begin to yield consistent, sustainable improvements. Supervisors who clung to a command-and-control style and failed to listen to what subordinates were saying were replaced. Within two years, the retooled program was generating eight-figure savings at three plants, but the safety and quality improvements from an engaged workforce were deemed the biggest benefit.

Glanbia’s implementation reflects the mix and match hybrids that organizations with a long track record in continuous improvement have adopted. Campbell Soup Co. illustrates the scenario. Employee engagement and team building have been emphasized throughout the organization for more than a decade, and the current manifestation is HPO, shorthand for high performance work organization.

Condensed soup is a mature market, and profitability for soup manufacturers necessarily must come from increased efficiency, not higher sales volume. At Campbell’s flagship production facility in Napoleon, Ohio, the HPO program that began two years ago is targeting $10 million in annual savings, according to Mark Cacciatore, vice president-manufacturing.

HPO emphasizes self-managed work teams, employee empowerment and total quality management. “We’re playing catch-up to some degree,” Cacciatore allows, “but we’re getting good cooperation from the (employee) union” in implementing it.

In November, the Ohio plant instituted a 30-minute overlap period for its 1,150 workers, replacing the en mass shift-change approach that had prevailed for decades. Instead of heading to their stations, workers in groups of 20 or fewer meet to review performance metrics and swap improvement ideas. “For us, it’s moving to a team-based, flow-to-the-work organization” that engages the staff and “leverages their knowledge,” Cacciatore says.

Supply chain optimization became a top priority at Campbell in 2004, when the first of more than half a dozen Procter & Gamble alumni joined the organization in leadership positions. A more recent supply-chain focus occurred at Dr Pepper Snapple Group (DPSG), the Plano, Texas-based firm that was spun off from Cadbury Schweppes in 2008.

Three years later, DPSG initiated Rapid Continuous Improvement (RCI) with the ambitious goal of achieving productivity improvements totaling $150 million by 2013. According to a recent investment report by UBS Securities, RCI had reduced needs for working capital needs and capital spending by approximately $170 million at year-end 2013.

William McDade, DPSG’s senior vice president-RCI and capital planning, describes RCI as a kaizen-based approach in which front-line workers receive training in the identification and elimination of waste and then are given responsibility for executing the necessary changes. More than 3,000 workers underwent week-long kaizen indoctrinations in the first two years. The changes are more sustainable, he believes, precisely because neither management nor consultants drive the effort.

Three principles guide RCI: change must be rapid, it must produce breakthrough changes of at least 30 percent better performance, and it must be executed by frontline personnel.
Reductions in safety stock throughout the supply chain have delivered the greatest financial impact to date. Every step in the chain, from raw material sourcing to the point of sale, was broken down and optimized.

Within the production zone, changeover was a major focus. Prior to RCI, changeovers typically took 47 minutes. After production workers applied their kaizen training, the time shrank to 20 minutes and, at one plant, 6. “That’s been one of the biggest wins for us,” says McDade.

He recalls the project executed by “L.C.,” a gentleman who had worked on the line since 1971. Once trained in kaizen methodology, he enthusiastically mapped out his movements and identified where efficiencies were possible. “He knew exactly what he had to do to change over faster,’ says McDade.

RCI also draws on lean techniques and Six Sigma for deep dives, he adds, “but the tools are the easy part. The culture change is what is hard for a lot of companies.
“We’re still in the early stages, we have lots of runway, but we have the right game plan,” he believes.

Productive, healthy workers

Before focusing on ergonomics and workplace safety, Jeffrey Smagacz consulted companies on the identification of financial risks and the adequacy of their insurance coverage, hence the name of the firm in which he is the managing partner: Risk Management Group, Franklin, Tenn.

Industry professionals often think of safety and production to be an either-or proposition. Smagacz firmly believes manufacturers can have both.

In 2009, he collaborated with Tim Morris, former manager-HSE programs at PepsiCo’s Quaker division, on a series of 3 1/2-day “ergo kaizen” events at nine production facilities. A day of data collection preceded each event, and cross-functional teams totaling 12-18 employees were trained and turned loose to identify and implement up to four dozen improvement projects that could be ergonomic or housekeeping-related. Most of the teams exceeded their goals, and the average cost to implement the improvements ranged from $13-$92.

Making tasks less physically stressful paid dividends beyond reductions in worker injuries. A pouch changeover that required stressful hand and wrist movements was simplified with the purchase of a right-angle cordless drill, reducing the time needed to remove poucher forms by 30 minutes. Adding a side guide to a vibrating shoot reduced product spillage to the tune of $6,000 a year of lost product across four lines, with the added benefit of less clean-up time.

Perhaps the program’s greatest endorsement is that it is still in place and has spread to other PepsiCo divisions, although the length of each event has shrunk as the lower hanging fruit has been removed.

“A lot of times, the solutions to problems are engineering based,” Smagacz reflects. As an engineer, he believes engineered solutions to ergonomic issues are more long-term. Most board-certified ergonomists (he is one) have health care backgrounds, and their solutions tend toward “bend at the knees” instead of “get a lift.”

Smagacz’s approach fits well with the engineering culture in PepsiCo’s bottling operations but not so with the Frito-Lay division, where a more “therapeutic view” of safety prevails.

Regardless of corporate culture, continuity is important, but programs can be difficult to sustain when results start to level off. Some clients get great results, suspend the ergonomic focus, see an uptick in injuries, then repeat the cycle. Others are satisfied “if they can check the box for corporate compliance,” he says.

A trailer manufacturer deferred on conducting an ergo kaizen because the firm’s injury rate was 5 per 100 f-t-e, below the 7 per 100 norm for the industrial category. At Procter & Gamble, the rate is 0.2 per 100, but the ergo focus is ongoing.

Knowing what a project is trying to achieve precedes selection of the improvement tool. Even before that, there must be recognition of the need for change. Bimbo’s Contreras suggested a defect rate of 99.9997 percent per units of output would rate as Six Sigma and contrasted that with 30 percent error rates on the target height for bread on some lines. “Where are bakeries (in Sigma level)? 2? 3?” he rhetorically asked.

Acquiring the skills to improve processes is important, concludes Carlino, but gaining employee engagement and getting buy-in to change is more difficult. He has spent the past 18 months in the UK, delivering “deep dive workshops” for Network Rail on lean.

“It will take years more to change the culture,” he says. The process is continuous because there always is room for improvement.

Sponsored Recommendations

Learn About: Micro Motion™ 4700 Config I/O Coriolis Transmitter

An Advanced Transmitter that Expands Connectivity

Micro Motion™ G-Series Coriolis Flow and Density Meter

Micro Motion G-Series: market-leading compact design featuring advanced process diagnostic capability.

Embracing Sustainability using Advanced Measurement Instrumentation

A practical guide to greeningyour brewing operationsusing advanced measurementinstrumentation.

Get Hands-On Training in Emerson's Interactive Plant Environment

Enhance the training experience and increase retention by training hands-on in Emerson's Interactive Plant Environment. Build skills here so you have them where and when it matters...