1660254092840 Liquidringpump

Emerging Plant Technologies Help Processors Make Better Beverages

Aug. 7, 2013
From micro-encapsulation to pulsed light, technology is providing processors with the tools needed to produce superior liquid foods.

When disco was king, "beverages" connoted soft drinks and bottled water came in 5-gallon carboys. Today, the market offers many more options, whether a person wants a thirst quencher, a nutritional drink or a temporary pick-me-up.

Delivering on the promise and potential of liquid refreshments poses new challenges not always successfully met by manufacturers. A case in point is beverages with nutritional enhancements, a category that includes drinks fortified with omega-3 fatty acids. Turbidity and oxidation can undermine the healthy-drinking objective with off flavors and murky appearance.

Technology doesn't always deliver as promised in overcoming challenges, as Nicole Shute can attest. The marketing manager for Hormel Foods Corp.'s specialty products division is trying to help a processor overcome problems encountered with a milk beverage fortified with EPA and DHA fatty acids. The product has not been well received, and Hormel has stepped in to try and solve the puzzle by applying its micro-encapsulation process, which was developed in conjunction with Virun Technologies.

The Austin, Minn., specialty products division debuted its shelf-stable omega-3 ingredients for still beverages three years ago, which was "a little ahead of the game on this," Shute allows. Fine tuning continued and a trickle of commercial products "with more substantial (health) claims" began to surface a year ago.

At this July's IFT Expo in Chicago, Hormel featured its Fuxions line for clear waters, fortified juices and other functional beverages. Commercial applications include Bang!, a muscle builder that delivers "sub-micron active compounds" that "go to work faster and hit your muscles harder than any drink on the planet," claims its manufacturer, VPS/Redline, Weston, Fla.

According to Virun Technologies' Philip Bromley, ingredient particles as small as 5 nanometers are enrobed with vitamin E. They are shelf stable in solution for a year and are tolerant of aseptic thermal treatment. The vitamin E coating is not absorbed into the blood stream, maximizing the bioavailability of the active ingredient. He says claims regarding heart health, brain health and defense against Alzheimer's and dementia can be made. "All the hard work is done," says Bromley, "now we're flourishing."

Whatever buzz Fuxion generated on the show floor was matched in IFT's scientific presentations by pulsed electric fields (PEF), a pasteurization technology best suited to beverages without particulates. PEF has languished in university labs for the past decade, but it is emerging in Europe with a push from DIL, the German Institute of Food Technology. DIL optimized the nonthermal, continuous PEF process before licensing the technology to ELEA, which in the last nine months has helped commission about a dozen Elcrack units capable of pasteurizing 5,000 liters an hour.

When juice manufacturers were considering options to meet FDA-mandated 5-log reductions under HACCP, PEF was promoted as an option, particularly for natural juices. It also has been shown to be an effective extraction aid. Genesis Juice in Eugene, Ore., applied PEF, but when the firm ceased operations in 2007, PEF use became dormant.

A research resurgence in recent years has pushed the number of academic studies of PEF to about 1,000 published papers, and the scientific community is doing what it can to encourage broader applications.

The liquid ring pump used in Fristam's powder mixer and shear blender resolves issues that processors experienced in years past with in-line blending of dry ingredients into liquid streams.

"Commercial adoption has been incredibly slow," concedes Michael Kempkes, an electrical engineer and vice president at Diversified Technologies Inc., a Bedford, Mass., defense contractor and the only U.S.-based fabricator of PEF units for commercial use. But interest in Europe is buoying the academic community, which is beginning to focus on more practical impediments to broader use.

Recalling consumer backlash to irradiation,  Dietrich Knorr, a professor at Berlin University of Technology, recommended adopting the term "micro pulse" when discussing PEF. When applied in German focus groups, "consumer acceptance was not negative" when that phrase was used, according to Knorr.

Heartbeat of the plant

Pumps provide the pulse for fluid transfer. They are essential components of beverage manufacturing, and there are almost as many types to choose from as there are beverages to be made. Matching the pump to the application often drives quality outcomes.

Centrifugal pumps are the go-to option for many processors, though cavitation, impeller wear and corrosion inside the pump can render them less than ideal for fluids meant for human consumption. They typically operate at 1,800-3,600 RPMs, imparting considerable energy into a product, points out Pete Ciorroco, business field manager-food & beverage for Netzsch Inc., Exton, Pa.

Rotary lobe pumps provide sanitary design and CIP compatibility, making them attractive to food companies, but in some applications, the best solution is the progressing/progressive cavity pump, he adds. "A progressing cavity pump is looked at as a niche product to resolve issues with other pumps." Operating speeds under 500 RPMs are typical, and very little slip occurs. Sanitary versions certified by 3A can move up to 300 gallons per minute. Product handling is extremely gentle. "We can pump grapes right off the de-stemmer and won't crush the seed," says Ciorroco.

Another gentle-handling option is the eccentric disc pump. Craft brewer Todd Haug of the Twin Cities' Surly Brewing Co. rejected centrifugal pumps out of hand because of the pulsation that accompanies slip, and his peers discouraged the use of rotary lobes because of maintenance issues. Low shear and elimination of pulsation led to selection of the Mouvex C-series eccentric disc pump, which provides enough suction to evacuate yeast and other sediment from tanks without succumbing to cavitation. The absence of mechanical seals prevents air and subsequent oxidation from impacting the product.

Eccentric movement pumps are ill-suited for liquids exceeding 10,000 centipoise, acknowledges Wallace Wittkoff, director-global segment marketing/hygienics at Pump Solutions Group, the Oak Brook Terrace, Ill., consortium that includes Mouvex pumps. Low viscosity beverages such as beer, on the other hand, are prime candidates.

"Where product recovery is important or when you're dealing with sugary products that can crystallize on seals, eccentric discs are an ideal solution," says Wittkoff. He recalls an application in which a processor was storing a liquid sugar formulation for two days in a tank to deaerate the product. By replacing a positive displacement pump with an eccentric disc, hold time was reduced to three hours.

Shear is not an issue in direct dispersion of dry powders into a liquid stream. In fact, "the more energy you're able to put in, the faster the job is going to get done," notes Dan Osiedacz, a product manager with Fristam Pumps USA, Middleton, Wis.

But powder mixers coupled with shear blenders developed a bad rap when centrifugal pumps provided the interface between those components. Air bubbles tended to get pulled in, halting pumping action and forcing operators to physically clear powder from the base of the funnel. Ten years ago, Fristam resolved the problem by swapping in a liquid ring pump. "The pump is the key part, because the strong suction can pump any entrained air and continue to pull the powder in," Osiedacz explains.

DIY CIP chemicals

Generators that produce electrolyzed oxidative (EO) water have been the subject of both academic research and commercial development for the past decade in North America, although the technology's initial use traces to the 1990s and Japan, where the generators were used in carpet cleaning. Several start-up companies refined the technology for use in food & beverage facilities, with EAU Technologies Inc. scoring the biggest successes in commercial applications (the firm relocated from Utah to Atlanta because of Georgia's prominence in carpet manufacturing).

German beverage processor Vilsa-Brunnen has installed three pulsed-light disinfection units from Claranor since 2011. Short, intense flashes of UV light destroy microorganisms' DNA, eliminating the need for chemical treatment of bottle caps.

EO water's biggest breakthrough may have occurred three years ago when SPX Corp. licensed EAU's technology. Under the wing of SPX's flow technology segment, multiple systems have been installed at carbonated beverage facilities. They have been validated for sport drinks, flavored waters and other pumpable foods.

An EO generator contains cathode and anode electrodes separated by a dividing membrane. Sodium chloride (salt) and softened water are electrolyzed to produce hypochlorous acid and sodium hydroxide, which are polarized and separated by the membrane. The resulting sanitizer and cleaner are then used in a CIP system, eliminating the need to purchase and store chemicals on site.

Beverage processors have a bigger need for the cleaning solution than the sanitizer, notes Jeff Sporer, director of sales in SPX's Delavan, Wis., office, but the EO generator primarily produces sanitizer. Rather than send sanitizer to drain, SPX's APVSafewater system recirculates it and adds sodium carbonate (soda ash), creating additional cleaning solution.

"We produce it at full usage strength, unlike other systems that create a concentrated solution that requires dilution," says Sporer. Producing a ready-to-use cleaner eliminates the need for balancing pH, conductivity and concentration.

Carbonated beverage processors who have implemented SPX's technology report annual savings of more than $100,000 in chemical purchases alone, Sporer maintains, but an even bigger benefit is up to 50 percent reduction in CIP cycle time. "The added uptime means maybe $1 million a year to them," he says. They also are realizing water savings of 20-40% and have simplified their wastewater-treatment process.

After one facility completed its validation, "workers thanked us because of the safety factor: They no longer had to deal with chemical spills, and burns from hot pipes don't occur," Sporer says. Instead of heating CIP water to 180°F, the plant dialed it down to 100°, thereby saving energy.

Fluid dairy operations and copackers who daily execute multiple CIP cycles are prime candidates for the technology. "The biggest payback is in applications where there are a high number of CIPs," he adds. "This is really a game changing solution for a lot of processors."

Dairy processors understandably are averse to the risk inherent in change, and none has been willing to undergo the validation needed to apply EO water to their operations. The same cannot be said of UV sterilization of packaging materials: Dairy is at the forefront of adoption of pulsed UV systems from Claranor. About 90 systems are in commercial use.

Elimination of chemical purchases contributes to the cost justification of pulsed UV, although the greater savings come from water: The purchase, heating and disposal costs of water-based sterilization fluids using peracetic acid or peroxide are non-existent. Overall operating costs are calculated to be as much as 70 percent less than with conventional cap-sterilization methods.

Half of Claranor's installations are in dairies, including two U.S. processors who are engaged in the validation stage. "Pulsed light is efficient on dry, smooth surfaces, with high efficiency on very resistant germs and with very low energy consumption," states Christophe Riedel, managing director at Claranor, Avignon, France, in an email. "A Claranor cap treatment providing 3 log reduction operates at 720 bpm with only 1 kW power."

Claranor's experiences illustrate the many ways process improvements can be derailed. Last year, the firm partnered with Fowler Products, an OEM of bottle capping systems, for North American distribution. Unfortunately, Fowler's strong suit is in the liquor segment, while Claranor is appealing to dairies, so the partnership was dissolved.

Business issues can derail promising technologies, but as Hormel's micro-encapsulation illustrates, process refinements and persistence can overcome them.

Sponsored Recommendations

Learn About: Micro Motion™ 4700 Config I/O Coriolis Transmitter

An Advanced Transmitter that Expands Connectivity

Managing and Reducing Methane Emission in Upstream Oil & Gas

Measurement Instrumentation for reducing emissions, improving efficiency and ensuring safety.

Rosemount™ 625IR Fixed Gas Detector (Video)

See how Rosemount™ 625IR Fixed Gas Detector helps keep workers safe with ultra-fast response times to detect hydrocarbon gases before they can create dangerous situations.

Get Hands-On Training in Emerson's Interactive Plant Environment

Enhance the training experience and increase retention by training hands-on in Emerson's Interactive Plant Environment. Build skills here so you have them where and when it matters...